Winter has come at last. And with it, the need for a cozy and warm home with a quick supply of hot water has now become more important and essential than ever.
Although there are simple ways to get the job done such as using a kitchen stove or immersion rod, they are certainly not the safest and involve a lot of hassle. If you are someone who doesn’t like to go through the hassle of warming the water manually, installing an electric water heater or geyser can be a great option.
They are safe, easy, and more convenient to use compared to other water heating devices. They last longer and save a lot of energy in the run compared to other alternative options.
So if you are planning to set up at your home, there are some important things you need to know before you go about installing one. That being said, here are the 5 most essential geyser installation tips that you need to know.
Space
One of the most important geyser installation tips is to get the measurement of the space you want to put the geyser in. This has to be done before purchasing a geyser. Otherwise, there is a chance that it will not fit the space. It is because depending on the capacity of the geyser, its size varies. So if you buy a 100-liter geyser, you will have to make sure that there is enough room for installation.
Location
After you have determined that you have enough space for installation, you will need to find out the sweet spot and height of the geyser. It would be located away from the wet areas such as the bathtub, shower, or toilet. This is one of the most essential geyser installation tips. Also make sure the unit doesn’t touch the floor, raise it above the floor and install it at an optimum height so that the unit can be accessed easily at any given anytime.
Electrical Connections
There are so many things that can go wrong with electrical connections if not careful enough. All things considered, electrical connections should be made very secure so that there is no chance of circuits getting short. Otherwise, it can damage the geyser but moreover, it can cause injuries, fire hazards, explosions, and even fatalities.
Also, keeping the switchboards outside of the bathroom is a good practice, it minimizes the chance of causing short circuits. If it is not possible then resort to water-resistant switchboards and try to place it in a place where water doesn’t reach very often.
Water lines, pipes
When it comes to installing a geyser, it is absolutely crucial to ensure proper water flow in the geyser. The lack of proper water flow can damage the equipment and shorten its lifespan. Also, make sure the water pipe is clean and free of clogs. After ensuring everything is okay, all you have to do is to follow the instruction manual to know exactly what are the steps you need to do next.
Maintenance
- Don’t leave your geyser on for extended periods of time. This actually shortens the lifespan of the unit. Modern geysers are efficient and can heat water faster.
- For larger geyser units, always check the anode rod inside the geyser for any damage. It is used to prevent the tank’s corrosion, so it needs to be replaced every few years.
- Check the pressure valve at least once a year for leakage.
- Always use a circuit breaker to prevent short circuits and accidents.
While installing a geyser may seem easy, it is not. You have to be skilled at plumbing, handling electronics, and electrical components. So it’s best to let experts handle the issue. One last important thing is always to go with branded items. That way, you won’t have to go through the hassle of scouting for the right parts and components when something goes wrong.
